Stainless steel enclosures for professional settings

The "speed" solid door modular cabinet is characterized by great stability and ease of assembly and an attractive design. Made of a single piece of bottom-rear-roof metal sheet, it is modular in battery but economically more competitive than a cabinet that can be completely opened also on the rear and roof. It is designed for mounting additional accessories such as plinth, adjustable feet, sloping roof, reinforcement bars or cable channels. It can be equipped with a wiring plate with lateral insertion, by means of sliding guides, and a bayonet-shaped lower cable guide flange with sealed polyurethane profiles. Battery assembly is normally carried out in the factory, allowing the customer to save considerable time in installation.

The "EGO" solid door modular cabinet is very robust and completely modular, so that can be opened on all sides. Its concept has been further improved: roof opening for easy insertion of cables from above, side panels suitable for anti-fall kits, easy assembly in battery, designed for mounting additional accessories such as plinth, adjustable feet, sloping roof, bars reinforcement or cable channels. It can be equipped with a wiring plate with lateral insertion, by means of sliding guides, and a bayonet-shaped lower cable guide flange with sealed polyurethane profiles. Battery assembly is normally carried out in the factory, allowing the customer to save considerable time in installation.

The "SCS" monobloc solid reversible door cabinet is characterized by great strength and watertightness thanks to the absence of through holes. Roof can be opened and rear panel can be removed by means of recessed screws, version with one or two doors even without upright. It is designed for mounting additional accessories such as plinth, adjustable feet, sloping roof, reinforcement bars or cable channels. Equipped with wiring plate in galvanized sheet metal, with front insertion on slides and adjustable in depth, lower flange with sealing or, on request, lower flange with bayonet cable guides with polyurethane profiles. The standard equipment is completed by lifting eyebolts, doors reinforced with internal pre-drilled tubulars and anti-cut edges.

The "SLS" transparent reversible door monobloc cabinet is characterized by a front door with transparent shockproof LEXAN panel fixed by means of an adhesive gasket and internal mechanical locking profile, great strength and watertightness thanks to the absence of through holes. Roof can be opened and rear panel can be removed by means of recessed screws, version with one or two doors even without upright. It is designed for mounting additional accessories such as plinth, adjustable feet, sloping roof, reinforcement bars or cable rails. Equipped with a galvanized sheet metal wiring plate, with front insertion on slides and adjustable in depth, lower sealing flange or, on request, a lower bayonet cable guide flange with polyurethane profiles. The standard equipment is completed by lifting eyebolts and cut-resistant edges.

The products of the “KOMMANDER” KC series are the only overhead control units on the market to have a rounded edge design. In addition to being eye-catching, this solution also makes them hygienic (the rounded shape favors the sliding of dirt and cleaning). They are extremely sturdy, thanks to the internal reinforcement for mounting the support joint of the arm, and are characterized by the handles in turned and ground solid steel rod. Reversible door that can be opened at max 120 ° with internal hinges and lateral double-wing locks in stainless steel.
Drilling for displays and / or buttons can be performed both on the body and on the door, allowing it to be used as a control panel both from the front (door side) and from the back (body), in the latter case using the rear door as inspection opening. The cables remain completely hidden and conveyed inside the tube.

The products of the KCS “SKIN” series combine extreme strength with a depth of only 100 mm. They are the only overhead control units on the market to have a rounded edge design. In addition to being eye-catching, this solution also makes them hygienic (the rounded shape favors the sliding of dirt and cleaning).
They are equipped with a rear extension for mounting the arm support joint, and a handle in solid turned and ground steel rod. In the standard version, without wiring plate, the display and / or buttons can be drilled on the door. The cables remain completely hidden and conveyed inside the tube and then enter through the rear support.

Support systems consisting of arms with fixed or rotating joints. Development and geometric shape according to customer specifications.

The blind door enclosures of the CDN series are characterized by wall fixing points made with a special threaded seal system that offers inside spacers as support for the mounting plate (optional); finished and polished welds; robotic applied internal polyurethane gaskets; great sturdiness thanks to the shape of the folds of the body that act as a stop for the door or lid. The door can be opened at max 120 ° with internal stainless steel hinges, welded and finished edges and locking with captive M4 screws with cut imprint characterize the series.

The blind door enclosures of the CPN series and the transparent door enclosures of the CLN series are characterized by wall fixing points made with a special threaded seal system that offers inside spacers for support of the mounting plate (included); finished and polished welds; completely internal seals with robotic application; great sturdiness thanks to the shape of the folds of the body that act as a stop for the door or lid. They can be supplied on demand completely drilled according to customer’s drawing.

The hygienic box of the CHD series has been specifically designed to meet the high hygiene standards required in the food and pharmaceutical manufacturing sectors. Its design in accordance with EHEDG requirements allows maximum cleanliness, ensuring the highest levels of hygiene and degrees of protection IP66-IP69K IK10. The CHD line can be customized with special processes and completed with a wide range of accessories on request. It is characterized by completely internal gasket and hinges, space increased by 100 mm in height for the mounting plate (on request), spacers for wall mounting (set to be purchased separately) made of solid turned steel.

MPGAMMA junction boxes and pushbutton panels have been designed to meet the demands in terms of practicality, installation and ease of cleaning, respecting the highest hygienic standards. They are characterized by wall fixing points made with a special threaded sealing system, which offers inside spacers to support DIN bars or mounting plate (optional); finished and polished welds; completely internal seals with robotic application; sturdiness thanks to the shape of the body folds to house the screws; cover with anti-loss slotted screws with safety ring.

• The external protective casing is made in AISI 304L (Wnr 1.4307) stainless steel.
• Scotch-brite satin finish.
• All conditioning systems have standard electronic adjustment. The digital microprocessor controller guarantees constant operating parameter diagnostics.
• Installation is made quick by the simplicity of the drilling, to be done on the cabinet panel, and by the fastening system.
• With a special cover all NXT versions can be semi-recessed mounted to minimize the space taken up externally.

Some models of air conditioners are also available in the UL version.

• The external protective casing is made in AISI 304L (Wnr 1.4307) stainless steel.
• Scotch-brite satin finish.
• All conditioning systems have standard electronic adjustment. The digital microprocessor controller guarantees constant operating parameter diagnostics.
• Installation is made quick by the simplicity of the drilling, to be done on the cabinet panel, and by the fastening system.

1. ATV 11 Filter fans 26 m3/hr
2. ATV 22 Filter fans 58 m3/hr
3. ATV 42 Filter fans 125 m3/hr
4. ATV 43 – ATV 44 Filter fans 255-410 m3/hr
5. ATV 54 – ATV 55 Filter fans 550-700 m3/hr